PDA

View Full Version : Error Code C550 Open Door message


Custom Search


tbgoffice
07-11-2012, 12:39 AM
I've got a BH550 that has open right door message. When I po/po machine message does not reset, open close door does not reset, but machine does come up with C0208 error code after opening and closing right side door. I've removed finisher and bridge, unplugged ADF, left all drawers open and rebooted with "open door" still showing. Checked all interlocks they work, they have power to them. With drawers open then open and closing right side door c0208 error does not happen. The machine goes through a start up like it is going to be ready to copy but errors with the "open door" message. I have checked the ICPS on the PRCB the all were good. I also tested ICPs on PFTDB those seem good, but feeling is that this board is the issue. Someone throw me a line I'm sinking!!!:confused:

snyder007
07-12-2012, 12:39 AM
Are all the switches aligned with the popper on the door? Are there any poppers busted off?

Custom Search