View Full Version : Konica 7155 Drivers for Windows 7
Doug James
07-11-2012, 04:50 PM
Does anyone know where I can get the drivers for this machine in Windows 7 format ?
Brischaffer
07-11-2012, 05:16 PM
I just checked on the KMBS tech site and they do not have them for that machine. The highest OS was XP 64-bit. Time for an upgrade!!!
Doug James
07-11-2012, 05:18 PM
Thanks so much...
Brischaffer
07-11-2012, 05:19 PM
Any time!
mrwho
07-11-2012, 09:15 PM
Your best bet is to use an HP PCL driver - try several Laserjet models until you find one that does duplex and allows you to choose the paper trays. At worst I believe you'll be able to print single-sided, but maybe you get lucky. Forget about user codes and finishing options, though...
TheOwl
07-11-2012, 11:32 PM
If the print controller has the optional Postscript kit in it, then you are in luck because there is a Windows driver available.
1. Add Printer
2. Select the port to print to or create a new one
3. Windows Update
4. Konica
Sometimes the Windows Update can take a while to download the list of printers so be patient.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.