i get abort code 0000999e and i had to replace NVRAM
-
-
Re: need konica minolta bizhub 250 firmware please
1st post and need need need. -
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!Comment
-
Re: need konica minolta bizhub 250 firmware please
If you've ever called the hotline, that's what they'll tell you, in this order:
1) firmware
2) main board
3) next most expensive part on the machine
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
-
Re: need konica minolta bizhub 250 firmware please
"You're the only one having this problem." when you've talked to four other dealers that can't solve the same problem either.
"So what! It still needs solving, whether I'm the only one or not." =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: need konica minolta bizhub 250 firmware please
i will try to change NVRAM but if it doesn't work this i want to try to load the firmware.Comment
-
Re: need konica minolta bizhub 250 firmware please
I have seen this problem many times. Here is the information from a Konica Minolta solution (I have had all 4 of these items cause this symptom).
Subject:
Machine keeps rebooting with abort code 0x0000999A.
Description:
Machine keeps rebooting with abort code 0x0000999A.
Solution:
PROBABLE CAUSES:
1. Failed fax board interfering with operation of MFBS.
Replace fax board kit, FK-503.
2. There is a TCP/IP address conflict between the MFP and another device on the network.
Remove the Ethernet cable from the MFP and PING the TCP/IP address. If the PING succeeds,
speak with the Network Administrator and resolve the TCP/IP address conflict.
3. Possible damaged MFBS board and/or MEMS module located in slot 4 (CN4).
Replace the MFBS board and/or MEMS module.
4. Print jobs are in queue for the machine on the customer's print server.
If there are jobs in the queue, please disconnect the machine from the network, delete the jobs on
the server and reconnect the machine to the network.Comment
-
Re: need konica minolta bizhub 250 firmware please
i can get that for ya, get out a pen and paper and get ready to make a list.Color is not 4 times harder... it's 65,000 times harder.
They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.Comment
Comment