View Full Version : Panasonic Fp-7718 Maint. Counter Reset?
EXPRESS
12-13-2007, 09:07 PM
FRIENDS,
I NEED YOUR HELP. I'M NOT A TECH. I OWN A PANASONIC FP-7718 BUT THE COMPANY THAT SOLD IT TO ME 10 YEARS AGO WILL NOT SERVICE IT ANYMORE. (TO OLD?) :confused: IT WAS WORKING FINE UNTIL THE MAINTENACE LIGHT (WRENCH) CAME ON. CAN SOMEONE WALK ME STEP BY STEP THROUGH RESETTING THE COUNTER?:) I DO HAVE SOME TECHNICAL EXPERIENCE.
THANK YOU
johnny32
01-04-2008, 03:57 PM
press the following keys in sequnce and hold down
user tools original a3 and 3
F hould appear on the copy display screen
type no 5 followed by start button
type 70 followed by start button
change setting to 0 and press start
repeat for nos 71 and 72
best of luck:):):)
IfItAintBrokeIcantFixIt
01-06-2008, 03:15 PM
press the following keys in sequnce and hold down
user tools original a3 and 3
F hould appear on the copy display screen
type no 5 followed by start button
type 70 followed by start button
change setting to 0 and press start
repeat for nos 71 and 72
best of luck:):):)
if the machine your working with is in english
use
User preset + Original size (Ledger) and the #3 keys to get to F-codes
machine will show F1 press 5 key to get too F5 press start
enter 70 press start. Press start again the = sign will flash enter 0 press start again. do same for 71 then 72
then press clear or stop till you get back to F5
turn machine off a few seconds then back on.
I can't remember but if machine comes back up with F1 on display. Press user preset and the clear key at same time to exit F codes and return to normal operation.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.