RADF on Konica 7272, model DF-322, jams on input. It jams as soon as the paper leaves the Read Conveying Roller (part 13qa45023) on its way down towards the platen. I have already replaced all intake rollers and cleaned and straightened the mylar tabs (Registration Auciliary Sheet A&B, Parts 13qa40410 and 13qa40420). If I loosen the screws securing the Paper Feed Guide Plate (part 13qa40033) and slightly misalign the Paper Feed Guide Plate, the RADF works great. However once I tighten up the screws again, the RADF jams.
Any ideas? It's driving me nuts!
Sorry about the prior empty post; the database crashed while I was posting!
Any ideas? It's driving me nuts!
Sorry about the prior empty post; the database crashed while I was posting!
Comment