PDA

View Full Version : Miscellaneous bizhub 920 pro fs-604


Custom Search


NEOTECH
07-25-2012, 01:25 AM
hi dear's i have problem in fs-604 finisher copier showing tha message in screen remov the paper main delivry try.
there is no paper also i clean all exit try sansor,

thank's

blackcat4866
07-25-2012, 01:57 AM
I wish I could tell you what I did ... I would tell you if I knew.

It was a bizhub Pro 950 with a FS-528 finisher. It had a "Sub Tray is full. Please remove paper." message when finisher stapling tray is empty. After 1/2 hour of still not finding any paper I started an "exploratory surgery". After 1 1/2 hours, and learning how to re-time the set eject belt gears, the message cleared and I ran 500 consecutive prints. Honestly I still don't know what made the difference. =^..^=

Custom Search