PDA

View Full Version : konica 7150 can't acces mode25


Custom Search


iori30
12-17-2007, 10:50 AM
hi all,

I have the F51-1 code on my copier. I've check the fuser lamps, one was not in contact. I've cleaned fuser, temperature sensor.
When i've tryed to go to mode25 to reset dipSw, the copier want a code (4digit). I don't have this code. I've try 0000, the sn of the copier... not working.

I think that i have to make a "clear all", but i don't know konica's copier. And i don't have the values of the adjustement that i have to reset.

Someone know a way to help me ?

sorry for my english, i live in france :)

thanks for help

iori

pepper38_cnd
12-17-2007, 12:19 PM
The code is a developer speed abnormality, just find what is causing binding, once the problem is resolved no resset is needed

iori30
12-17-2007, 12:28 PM
i've make a mistake, the code was F35-1:cool:

pepper38_cnd
12-17-2007, 01:00 PM
There should not be a password to get into 25 mode just hold 2&5 while powering up machine, if it insist on a password try 9272 standard service password.

iori30
12-17-2007, 01:38 PM
it works. thanks a lot:)

Custom Search