PDA

View Full Version : Xerox 620


Custom Search


rrtomes
08-16-2005, 07:03 PM
Does anyone know what the part # is for the ribbon drive belt on a xerox 620 typewriter or where i can get the number from

Robert Sveinson
12-06-2009, 08:21 PM
Does anyone know what the part # is for the ribbon drive belt on a xerox 620 typewriter or where i can get the number from

My bet is that it is a toothed belt. Teeth on the inside or outside.
It might be or mightnot be a metric size belt.
Local businesses may have a new magical belt. Width of the belt is important so that it doe not grind the belt. Number of teeth and depth of teeth are also important to prevent shredding.


I cannot even guess what prices are that your company supplies.
After market belts are the same.
There is/was a vey strange toothed belt that were being
sent to us. This belt was constructed with steel internal steel strands.
They gave us more copies between service calls.
AH!! Life was better then too!

Robert

Leslie Vance
01-20-2010, 02:00 PM
I agree with robert information and excellent for that check it out the manual for your review to identify or get the information from the shops....
Paper shredding (http://www.priorityshred.com/why-paper-shredding.html)

Custom Search