PDA

View Full Version : bizhub c35 blank copies


Custom Search


duane@pbbsinc.com
08-10-2012, 01:09 PM
I have a bizhub c35 that is giving me a blank copy everyother copy off glass or through feeder but not on prints.
I have swapped the mother board for a different warrany claim un related to this issue.
The machine after being in field for about four months had a scanner lock error and scanner was not locked it took a mother board too fix it. Then i received a call back for this everyother copy blank issue and thought cust was crazy untill i duplicated the symptom.
Any ideas ????

Ben Around
08-10-2012, 02:16 PM
Just an idea, check your ribbon cable connection on the PRCB board. It's at the top. I quess it could be a problem with the PRCB board as well.

Ben Around
08-10-2012, 02:24 PM
The connector is PJ10, it goes to the HV board. I had that problem where it was not connecting good and it caused blank copies. But it was in all modes.

JustManuals
08-10-2012, 04:25 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Custom Search