PDA

View Full Version : BIZHUB C300 copies are slightly out of square


Custom Search


tecnomarco
08-14-2012, 05:03 PM
Greetings all, I have a problem on the konica bizhub c300 copies are slightly out of square it seems that the inserted sheet to be copied is not inserted correctly, there may be an adjustment of the scanner?

Darren King
08-19-2012, 03:05 AM
Is the same happening on internal prints? If not, grab the left corner of the scanner bed and lift it slighty. That should do it.
Darren

Custom Search