View Full Version : C364 Service Mode
Mat Wilson
08-22-2012, 08:04 AM
I have just started to run up a new Konica Minolta C364 machine but i am unable to get into service mode. Unfortunately i have not completed the training so i dont have a service manual to look at the process. I have started the training but the customer needs the machine ASAP. Any help would be greatly appreciated.
Stop-0-stop-0-1 machine will then ask for a password in the display which is 9272 9272 9272 9272 then press "end"
kingarthur
08-23-2012, 10:46 AM
when you go into it, turn off the necessity for the password & also change the admin password to the usual
Bizhub
08-23-2012, 07:50 PM
when you go into it, turn off the necessity for the password & also change the admin password to the usual Don't forget the new passwords as K-M say if you forget them you would need to replace the MFP board and the SSD chip.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.