PDA

View Full Version : konica minolta bizhub 163


Custom Search


bebe.radescu
08-28-2012, 06:01 AM
I need to change the developer and the drum on a 163. I hear that the atdc sensor must be set without the bootle in the copier. I don't know how to do that. Is it done in service mode?

JustManuals
08-28-2012, 06:50 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

ni311
08-28-2012, 05:58 PM
After changing the developer, you need to 'read' the toner/developer ratio. This is done with 'ATDC Auto Adjust' function that is found in Service Mode. But before changing the developer be sure to run twice ATDC Auto Adjust with no toner bottle in the machine, just to be sure that all the old recycled toner that is on the ducts will be fed into the developing mixing chamber.

Custom Search