PDA

View Full Version : Miscellaneous Little pile of toner on drum


Custom Search


KornGod
08-30-2012, 04:48 PM
Hi, Quick question for you guys.

I just acquired a Bizhub C550 and it is leaving a black smear on the copies. When I look at the Imiging unit, there is a little pile of toner building up on it. any ideas???:confused:

KornGod
08-30-2012, 07:30 PM
Anyone??? it's really strange.

JR2ALTA
08-30-2012, 09:01 PM
It's probably developer, if the powder sticks to your magnetic screwdriver it's developer. Replace the unit

1FRY1
08-30-2012, 10:43 PM
550's loads of problems with dropping black dev, mainly to do with poor connections on the back of IU,

There is a mod which is a plate that holds the K dev unit secure in the M/C (tighter than the blue handle)

If you can't get the mod replace the IU and pack the blue handle to give more pressure to the front of the IU

JustManuals
08-30-2012, 11:39 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

KornGod
08-31-2012, 05:54 AM
Thanks for the tips.

PeterG
09-03-2012, 07:10 AM
550's loads of problems with dropping black dev, mainly to do with poor connections on the back of IU,

There is a mod which is a plate that holds the K dev unit secure in the M/C (tighter than the blue handle)

If you can't get the mod replace the IU and pack the blue handle to give more pressure to the front of the IU

And replace the tray 3 & 4 paper feed drive gear in 6 months after it has worn out from the dev having dropped on it.:eek:

Custom Search