PDA

View Full Version : Jamming Bizhub C280 with FS-527 + PK-517 J-72-43


Custom Search


MLX
09-05-2012, 05:59 AM
We having a Bizhub C280 with Finisher FS-527 and PK-517 built-in.
With punch a traffic jam J72-43 appears and the paper it is not given.
Who can help me?
Thanks beforehand

kingarthur
09-05-2012, 09:05 AM
it's probably the PCB in the FNS

Zeldaman
09-05-2012, 11:08 AM
Hi there!
Take at 1. a close look on the punch-unit. Had it several times that the punching-flutes were dirty & therefore atiming/jam-problem occured.
Greetings...

MLX
09-05-2012, 03:11 PM
Thanks for your contributions!
Will exchange the PWB of the FNS!


:p

JustManuals
09-05-2012, 04:31 PM
The service manuals for these peripherals is included in the Theory of operation manual for the C280 etc...

Konica-Minolta Bizhub C220, C280, C360 Theory Of Operation Service Manual - $12.77 : Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com/index.php?main_page=product_info&cPath=0&products_id=480)

HtH
Paul@justmanuals.com

blackcat4866
09-06-2012, 01:34 AM
Before you spend the bucks, try just power Off/On. Sometimes during a jam condition the punch gets out of time (the punches block the path). When you power Off/On it can find the punch home position. You can also just have a piece of paper crammed into the punch in such a way that you can't see it. =^..^=

MLX
09-06-2012, 03:12 PM
Now I have renewed the PWB of the FNS and have done an extensive test run.
Now is all right and runīs like a sewing maschine.:cool:
Many thanks for your help:o

Custom Search