View Full Version : Error Code Code C-2813
Keep getting error C-2813, even when I change the drums, sensors, also cleaned all sensors, but keep getting the same error code even when I change those parts, code remains. Could it be I need to change cyan developer?
K/M c6500
blaze2000
09-13-2012, 03:08 PM
what machine are you working on??
blaze2000
09-13-2012, 03:58 PM
Changing the developer might not hurt but if you changed the drum potential sensor and drum potential sensor board, then PRCB is the next step.
Changing the developer might not hurt but if you changed the drum potential sensor and drum potential sensor board, then PRCB is the next step. what is PRCB
blaze2000
09-14-2012, 12:27 PM
Print control board
JustManuals
09-14-2012, 01:46 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
the prcb was fix one month ago
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.