View Full Version : Error Code konica
Hi ihave this machine by mark conica 2223 that is giving me this error code F 35 some hep will be grathfull tanks
barratec
09-17-2012, 11:03 AM
Hi,
you have a problem with the fixing unit. Check and eventually change thermistor, fixing lamp, fuser rollers.
To reset the code perform fase 25 P47 and input 00.
JustManuals
09-17-2012, 08:10 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Coptech
09-17-2012, 08:15 PM
power on while holding 2 and 5 simultaneously, press p, 47, p, 0, print, power off and on.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.