PDA

View Full Version : Afficio 1224C error


Custom Search


stupidmachines
12-27-2007, 06:54 PM
I wish the boss would stop telling this guy yes we'll work on it. They took the imaging unit out them selves and then took compressed air to it. Then they put it back and SC571 has come up. I have no manuals for this thing and have no idea what this code is. PLEASE help me out here.

Thanks

banderas
12-27-2007, 11:42 PM
Fusing oil overflow
Symptom:
• The oil overflow sensor detects oil.
• When the machine covers are
closed, the oil supply unit is not
detected.
• When the machine covers are
closed, the fusing unit is not
detected.

Possible Cause:
• Defective oil end sensor
• Defective oil overflow sensor
• Defective sensor cable
• Oil supply unit not installed

Reset Procedure:

Reset the SC (set SP5-810 to 1),
then turn the main switch off then
on again.

good luck
banderas


I wish the boss would stop telling this guy yes we'll work on it. They took the imaging unit out them selves and then took compressed air to it. Then they put it back and SC571 has come up. I have no manuals for this thing and have no idea what this code is. PLEASE help me out here.

Thanks

Custom Search