oddmail
12-28-2007, 07:05 AM
Hello,
I'm working on a Konica DF-314 document feeder were the paper is just pulled into the Registration Unit Driving Roller (the next roller after the Paper Feed Roller which comes first) and then stops. The driving pulley for the roller rotates as it should, but the roller/shaft does not.
First of all I would appreciate any advice, and if anyone has a service manual I could need that as well.
BRGDS,
Odd
I'm working on a Konica DF-314 document feeder were the paper is just pulled into the Registration Unit Driving Roller (the next roller after the Paper Feed Roller which comes first) and then stops. The driving pulley for the roller rotates as it should, but the roller/shaft does not.
First of all I would appreciate any advice, and if anyone has a service manual I could need that as well.
BRGDS,
Odd