PDA

View Full Version : Finisher Cross Compatibility FS-522 to FS-510


Custom Search


VeeDubs86
09-27-2012, 01:20 AM
Hello,

I was just curious if I could pull a finisher off say a Bizhub 420 (FS-511 I believe), swap the gray panels with black ones, and put it on a Bizhub 421 (which normally takes a FS-522 I believe). They look exactly the same, but am not sure about the connectors and boards.

Thanks.

EarthKmTech
09-28-2012, 09:44 AM
I'd go ahead and try it.

I test my rebuilt FS-529's on my personal C253 for functionality, though obviously cant print, before returning to site and it works. That finisher was never even around when that machine was current :rolleyes:

JustManuals
09-28-2012, 01:43 PM
If you can do it without a big hammer, give it a go and report back here.


Paul@justmanuals.com

Custom Search