Konica C8050 inssue

[truongson]

My konica printed misalignment like :
File :

http://nr6.upanh.com/b6.s30.d2/217cac76e29f989abff3ab99a510b94a_49589106.misalign ment.jpg (http://www.upanh.com/misalignment_upanh/v/7rmf6a2h0oz.htm)http://nr2.upanh.com/b3.s30.d2/b7e654303a904fdb29b51954ec6a8ef6_49589152.lechmau. jpg (http://www.upanh.com/lech_mau_upanh/v/frmdda1heyq.htm)

Printed : The Magenta out of other colors . The second "HELLO" I scan after printed so it look darker the 1st "HELLO" printing file.


Please help me ? How to run alignment adjust ?

[Gort]

Try to make a copy. If the colors are still that far out of alignment you have a serious problem!
If all is good in copy mode, re-start the print controller.
The machine should have thrown a code if the colors are that far our of registration. The registration can only be adjusted a few millimeters.

[truongson]

Try to make a copy. If the colors are still that far out of alignment you have a serious problem!
If all is good in copy mode, re-start the print controller.
The machine should have thrown a code if the colors are that far our of registration. The registration can only be adjusted a few millimeters.


I made some copy and the colors still out of alignment , I think I need to run alignment adjust tool from service mode, But I don't know how to do, some one guide me go to 3-6 mode but I can't find this tool. I see the colors just misalignment a few millimeters so run adjust can solve this issue ?

Thanks,