PDA

View Full Version : Minolta CF-2002 Won't Clear Misfeed? H E L P !


Custom Search


BigDoorStudio
10-03-2012, 05:15 PM
I got a paper jam.
Cleared the paper and inspected rollers and opened and closed all
appropriate doors and restarted. But the misfeed message will not clear?
( See attached image )

Any thoughts on what I might be missing? Bad sensor? Thanks for your help.

JustManuals
10-03-2012, 07:32 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

BigDoorStudio
10-03-2012, 08:02 PM
Thank you, but I have manuals. Need insight.

EarthKmTech
10-03-2012, 10:56 PM
ensure there isn't a piece of paper trapped and hidden under the paper dust remover.

BigDoorStudio
10-03-2012, 11:05 PM
I took it off, but I'll look again. Thanks.

minimerlin
10-03-2012, 11:18 PM
Looks like the area showing the jam is the duplex door are. Check the sensors in the duplex.

EarthKmTech
10-03-2012, 11:54 PM
to be certain,

if you can get into service mode have a look at the jam history and see what was logged as the last recorded jam code.

(its been a long time since i saw one of these dinosaurs so i don't know if it even does log them in time sequence)

come to think of it, i dont think they do anyway,.

BigDoorStudio
10-04-2012, 12:05 AM
I poke around in there. Sounds like it's worth a try at this point. Yes it is a relic. Gum and duct tape but it keeps running.

Custom Search