View Full Version : Minolta CF-2002 Won't Clear Misfeed? H E L P !
BigDoorStudio
10-03-2012, 04:15 PM
I got a paper jam.
Cleared the paper and inspected rollers and opened and closed all
appropriate doors and restarted. But the misfeed message will not clear?
( See attached image )
Any thoughts on what I might be missing? Bad sensor? Thanks for your help.
JustManuals
10-03-2012, 06:32 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
BigDoorStudio
10-03-2012, 07:02 PM
Thank you, but I have manuals. Need insight.
EarthKmTech
10-03-2012, 09:56 PM
ensure there isn't a piece of paper trapped and hidden under the paper dust remover.
BigDoorStudio
10-03-2012, 10:05 PM
I took it off, but I'll look again. Thanks.
minimerlin
10-03-2012, 10:18 PM
Looks like the area showing the jam is the duplex door are. Check the sensors in the duplex.
EarthKmTech
10-03-2012, 10:54 PM
to be certain,
if you can get into service mode have a look at the jam history and see what was logged as the last recorded jam code.
(its been a long time since i saw one of these dinosaurs so i don't know if it even does log them in time sequence)
come to think of it, i dont think they do anyway,.
BigDoorStudio
10-03-2012, 11:05 PM
I poke around in there. Sounds like it's worth a try at this point. Yes it is a relic. Gum and duct tape but it keeps running.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.