PDA

View Full Version : Any ideas to what is happening to our copier?


Custom Search


Motchedo
10-04-2012, 06:01 PM
We have a Konica Colorforce 8050 at our workplace. We performed the 200K maintenance to the unit and conducted the adjustments. The problem is that we are seeing the Cyan and Black print on paper during the alignments but do not see the Yellow or Magenta. When running Auto Gamma Adjust, we receive either the 29-07 or 29-08 error.

What do you think?

RRodgers
10-04-2012, 06:20 PM
Be sure to check the developer unit are installed properlyand the driver gears for the developer units arent worn out

Motchedo
10-04-2012, 07:08 PM
The developer units for yellow and magenta are new as well as the yellow drum cartridge.

JustManuals
10-04-2012, 08:52 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Custom Search