View Full Version : di 3510 abort problem
goldencup
10-10-2012, 06:57 AM
Hi, any one of you have encountered this abort code on dialta 3510? Thank you very much.
17550
goldencup
10-10-2012, 07:26 AM
17551 here is the other abort taskname that appears after the machine rans out of paper.
Darren King
10-10-2012, 01:24 PM
This is what the sarvice manual says.
Device control systemfailure0x00100000to 0x001fffffMFB3 Board, FAX Board, Memory Board*1,CLAN Board*2, FN-117, JS-203, MK-1, SK-1,
ni311
10-10-2012, 03:19 PM
<Symptom>
When Paper Empty occurs, the Abort Code "0x00101001" appears.
<Descriptions>
If the accumulate number of job count up over 32,276 counts, this problem occurs always. The job means copy, fax, print and scan.
<Solution>
Upgrade the MSC Firmware. Firmware Version: 4030-xxGx -40-xx The version is shown on the display differently. Copier model: 4030-xxG3-40-xx Fax model: 4030-xxG4-40-xx For Pi3505e/PS: Version 4030-xxG5-40-xx
goldencup
10-16-2012, 03:52 AM
Hi, can i just get a CF Card with a higher version from a good machine and simply replace it? Will it affect other system or part of the machine? Thank you
EarthKmTech
10-16-2012, 10:18 AM
nothing other than firmware is stored on the 32mb cf card.
rewriting it to a newer version is very easy anyway, dont know why youd want to take one from another machine.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.