PDA

View Full Version : KM 452


Custom Search


diamondian
10-14-2012, 04:23 PM
Just switched on our KM452 after a little while with it idle and can't seem to get jobs across to it.

Picking it up on appletalk and on USB, whenever i send a job to the machine the blue data light flashes but nothing comes across the the que's.

Any ideas..

blackcat4866
10-14-2012, 04:34 PM
So you have the basic network connection. Is the machine displaying any error conditions that would prevent it from printing? Anything from Add Toner, to Load A4 Paper, to C1183, can prevent printing. =^..^=

diamondian
10-14-2012, 04:41 PM
No, its all good and ready to go..

Just had a quick thought, tried putting the job on a USB stick, it beeps when inserted but nothing comes up on the screen.

blackcat4866
10-14-2012, 04:49 PM
If you're a tech:

You can re-load firmware.
If that doesn't help, re-format the HDD, then reload movie data, and re-enter encryption code.

If you're not a tech, please call one. These tasks are not as easy as they sound. Once I had all the addressbook entries re-entered and working there was three hours into it, and I sort-of knew what I was doing. =^..^=

Custom Search