View Full Version : C451 P-31 with Black image out
Hi guys Im new, but have used looked at the forum before. its great!
Having an issue with a C451 having P-31 code.
I'v replaced
K-IU
Transfer belt
K-IU motor
But the black image intermittently moves out of place.
Any help would be appreciated.
Hi guys Im new, but have used looked at the forum before. its great!
Having an issue with a C451 having P-31 code.
I'v replaced
K-IU
Transfer belt
K-IU motor
But the black image intermittently moves out of place.
Any help would be appreciated.
P-31 indicates a failure of PC45 (PC encoder sensor/1) and/or PC46 (PC encoder sensor/2) to detect proper rotation of the black drum.
The encoder sensors are not available as unique parts. Replace the main drive assembly (p/n A00J R704 00) which includes PC45 and PC46.
JustManuals
10-16-2012, 06:10 AM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.