PDA

View Full Version : Minolta DI 152 Display shows 88


Custom Search


josephmeza
10-21-2012, 04:51 AM
:)Hi is me again hoping someone has seen this before, I have a minolta di 152 that shows the # 88 on the display but it will not do anything else
If you open covers the display will indicate the cover that is open or problem code, It powers up normally everything cycles correctly. When the power on
sequence is complete the display shows # 88 and it wont copy or do anything.
there is no problem for 88 on the manual. Please help...............

Hansoon
10-21-2012, 07:05 AM
Obviously you are desperate but how often are you going to post this?

http://www.copytechnet.com/forums/search.php?searchid=233246

Its either stuck button or blown board.

Hans

josephmeza
10-21-2012, 11:57 PM
Obviously you are desperate but how often are you going to post this?

http://www.copytechnet.com/forums/search.php?searchid=233246

Its either stuck button or blown board.

Hans

Obiously, you know nothing about this, I hope the technician that has seen this problem is a member of
this site.
With all do respect if you do not know about this why waste your time with my post.
Leave it for a Field service engineer that has worked for minolta.
Thank you for your time and your help.

Hansoon
10-22-2012, 07:50 AM
Obiously, you know nothing about this, I hope the technician that has seen this problem is a member of
this site.
With all do respect if you do not know about this why waste your time with my post.
Leave it for a Field service engineer that has worked for minolta.
Thank you for your time and your help.


I think with that arrogant and plainly dumb attitude you will not find anyone willing to help you here buddy......

Hans

Custom Search