Eugene74
10-23-2012, 11:56 AM
HI all,
I have a C360 with 240K copies on. The machine is making copies with uneven density. It is lighter in density on the front side of the machine. I have replace all the drums, developer tanks, transfer belt and roller. There is toner in the machine as well. I have checked the transfer adjustments, as well as fuser temp and speed. I've check if the machine is standing level. The only part that I didn't replace is the fuser but the fuser is not that old. It's about 3 months old. The paper the client is printing on is 170gsm Prestine matt, we tried 115 gsm matt as well as 80 gsm bond, all with the same effect.
Could someone please assist me, as I am currently at the end of the road.
Thanks
Eugene
I have a C360 with 240K copies on. The machine is making copies with uneven density. It is lighter in density on the front side of the machine. I have replace all the drums, developer tanks, transfer belt and roller. There is toner in the machine as well. I have checked the transfer adjustments, as well as fuser temp and speed. I've check if the machine is standing level. The only part that I didn't replace is the fuser but the fuser is not that old. It's about 3 months old. The paper the client is printing on is 170gsm Prestine matt, we tried 115 gsm matt as well as 80 gsm bond, all with the same effect.
Could someone please assist me, as I am currently at the end of the road.
Thanks
Eugene