PDA

View Full Version : Konica Minolta Bizhub C200 size detection


Custom Search


Alex1
10-24-2012, 05:11 AM
Hi

i have a Konica Minolta Bizhub C200. The machine keeps saying to remove the A3 paper left on the glass, but there's no paper on the glass, it does that every time I want to use the ADF or lift the ADF it keeps detecting A3, usually I change the settings in the Bizhub c353 253 from table 2 to table 1 in the service mode, I can't find the setting in the C200 can anyone help please??

EarthKmTech
10-24-2012, 09:48 AM
make sure you haven't applied the engine firmware update that alters the behaviour of the main power supply, its shit.

B0265
10-24-2012, 12:36 PM
Check if there is any cracks in the left ADF hinge.

JustManuals
10-24-2012, 10:32 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Alex1
10-25-2012, 10:02 AM
Hi Earthkm Tech,


Ill get the firmware updated and see how I go, thank you much appreciated.

Alex1
10-25-2012, 10:03 AM
Hi B0265,

the ADF looks fine with no cracks. Thank you for your help very appreciated.

B0265
10-25-2012, 11:08 AM
This is where the ADF hinge breaks.
17900

Alex1
11-02-2012, 10:47 AM
This is where the ADF hinge breaks.
17900


Hey thank you so much I appreciate your help

Alex1
11-02-2012, 10:48 AM
Thank you all for you help really appreciated

EarthKmTech
11-02-2012, 11:06 AM
the adf hinges snap all the time on these - make sure when you replace it if its broken you set the stoppers in the right position, if the adf isnt allowed to open to the correct, non wheelchair friendly position, people often force it up and that will snap it again.

Custom Search