PDA

View Full Version : FS-608 not stapling


Custom Search


wseyller
10-30-2012, 09:11 PM
I am very new to finishers. At first a message to replace stapler 1 & 2. I remove some loose staples and such. I little lever that presses a micro switch in one the of stapler units fell off and I got it back on. So I got the messages to go away. Tried different stapling options and positions. Corner staple or 2 position. I can see the staple holes in the paper but no staple.

wseyller
10-31-2012, 04:16 PM
Problem seems to be solved. I discovered that it has to staple a few times so the staple advance enough.

Sent from my DROID BIONIC using Tapatalk 2

Custom Search