PDA

View Full Version : Minolta Di-183f, C13F0


Custom Search


Hansoon
01-08-2008, 08:41 PM
Minolta Di-183f, C13F0. Any other causes known as those written in the book? Polygon Mirror spins up as usual. Hans

Scott_Lewis
01-09-2008, 04:16 AM
I would go through and reseat all of the connections between the PH and PWB-A. Visually check for pinched wires along the same wire bundle/ribbon. I think there is a ribbon cable in there.....carefully clean the contacts on the ribbon cable with a soft pencil eraser.

Otherwise, you need to narrow down the problem between the PH or PWB. BTW, even though the poly motor is turning, speed could be off, the SOS sensor is bad, laser is dead, etc.

Hansoon
01-09-2008, 05:46 PM
The flat ribbon cable was having a very fine, almost invisible, crack. Thanks Hans

Custom Search