PDA

View Full Version : Miscellaneous BizHub C451 black printing


Custom Search


Hadaf
11-06-2012, 04:03 PM
Hi guys
I bought a used Konica Minolta Bizhub C451, while prinitng black/colour the black printer skips a complete line form the top and some time a small line from the bottom the colour it prints all fine

konica minolta technician was called in, he said your issue is due to black imaging unit so i got it from another machine and replaced it but it is still the same NO DIFFERENCE at all

sample image is attached
18074
white line can be seen on the top

please advice?

dallas
11-06-2012, 05:34 PM
- Clean the BK Laserglas (Developer throw out)
- Put the BK IU back to the other Machine
- Buy for this Unit a new BK IU.

JustManuals
11-06-2012, 06:42 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Hadaf
11-08-2012, 09:46 AM
Thank you Dallas,

i called in a NON Konica Minolta technician and he did exectly what you said, just cleaned the glasss under neeth the black IU and it works like a charm now :)

your help is really appriciated

Regards

ni311
11-08-2012, 05:55 PM
The technician from KM said what Dallas said but just in reverse order :) His goal was to sell you a new k unit and afterward to fix your machine even if these two operations aren't related as it looks at first glance.

Custom Search