jammed paper message M4, M5 or M6 appears at power. after changing the three gears

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • astuto-2008
    • May 2025
    #1

    jammed paper message M4, M5 or M6 appears at power. after changing the three gears

    We changed gears parts. Star machine and paper machine and jummed paper, remove tha paper and check all areas in the fuser. but does not clear the jammed paper message in m4 m5 or m6 area. Have no idea what could have happened

    I appreciate your comments
    Tags: None
    • Darren King
      copiertech

      500+ Posts
      • Jul 2007
      • 652
      #2
      Re: jammed paper message M4, M5 or M6 appears at power. after changing the three gear

      The three gears? You may have to be a little more specific. We are good here, but, we can't read minds. What make and model are you working on?

        Comment

        • astuto-2008
          #3
          Re: jammed paper message M4, M5 or M6 appears at power. after changing the three gear

          Sorry

          Problems jam on a C6500 bizhub Drive3 fixing gears change the fuser (m22T) # part A03U809311 turned on the machine we set aside a printed paper 11 "x17" 105 grs. there Jam at the fuser. we get the module remove the jam review all m4, m5, m6 machine and close the message remains.
          We put forward machine, turn on and the same message appears, remove one and test it 08AA85512 Photosensor the sensors to output paper that are 2 and nothing changed three fuser and nothing. The machine to turn the message reappears jam. We did disappear upon entering the service mode and we go to put the heating step, but when printing sent the MSIM message reappears we get the print module course remove the jam review all m4, m5, m6 machine and closed message remains.

          also
          I have already tried:
          came back to put the old gears and nothing we have tried to test the sensors by removing a tray 3 so we will slowly replacing the fuser and paper output and nothing we can do

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838
              #4
              Re: jammed paper message M4, M5 or M6 appears at power. after changing the three gear

              This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

              Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


              Paul@justmanuals.com

                Comment

                • JustManuals
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2006
                  • 9838
                  #5
                  Re: jammed paper message M4, M5 or M6 appears at power. after changing the three gear

                  Originally posted by Darren King
                  The three gears? You may have to be a little more specific. We are good here, but, we can't read minds. What make and model are you working on?
                  Who says we can't read minds? Every time Zaza shows up we already know what he wants before he even posts.

                  (Frimware and the manuals)

                    Comment

                    Previous template Next
                    Working...