PDA

View Full Version : jammed paper message M4, M5 or M6 appears at power. after changing the three gears


Custom Search


astuto-2008
11-23-2012, 06:28 PM
We changed gears parts. Star machine and paper machine and jummed paper, remove tha paper and check all areas in the fuser. but does not clear the jammed paper message in m4 m5 or m6 area. Have no idea what could have happened

I appreciate your comments

Darren King
11-23-2012, 08:19 PM
The three gears? You may have to be a little more specific. We are good here, but, we can't read minds. What make and model are you working on?

astuto-2008
11-23-2012, 09:35 PM
Sorry

Problems jam on a C6500 bizhub Drive3 fixing gears change the fuser (m22T) # part A03U809311 turned on the machine we set aside a printed paper 11 "x17" 105 grs. there Jam at the fuser. we get the module remove the jam review all m4, m5, m6 machine and close the message remains.
We put forward machine, turn on and the same message appears, remove one and test it 08AA85512 Photosensor the sensors to output paper that are 2 and nothing changed three fuser and nothing. The machine to turn the message reappears jam. We did disappear upon entering the service mode and we go to put the heating step, but when printing sent the MSIM message reappears we get the print module course remove the jam review all m4, m5, m6 machine and closed message remains.

also
I have already tried:
came back to put the old gears and nothing we have tried to test the sensors by removing a tray 3 so we will slowly replacing the fuser and paper output and nothing we can do

JustManuals
11-25-2012, 02:04 AM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

JustManuals
11-25-2012, 02:06 AM
The three gears? You may have to be a little more specific. We are good here, but, we can't read minds. What make and model are you working on?

Who says we can't read minds? Every time Zaza shows up we already know what he wants before he even posts.

(Frimware and the manuals)

Custom Search