PDA

View Full Version : BIZHUB C450,RESET PROBLEM


Custom Search


COPIERTEC ASSOCIATES
11-30-2012, 05:44 PM
Hi to all comrades,i have the above machine which i have replaced all the imaging units with new refurbished units.The machine still indicates replace YKCM IUs.Assistance requested to reset the imaging unit replacement message.
On the same machine, every morning whenever the machine is switched ON it will give a fuser error C3451 and the fuser lamps do not go on.After resetting the error the heaters then go on.Where could the problem be? Thanks in advance.

Custom Search