View Full Version : konica 1015 copier
farmer11
01-14-2008, 09:16 PM
This copier will not completely exit the paper. Anyone have any ideas?
Thanks
Mark B
01-14-2008, 09:57 PM
Time for a new machine
bushy
01-15-2008, 02:16 AM
If the m/c previously had a sorter then the conveyor unit may still be installed
If not then there is a gear on the delivery rollers that wears unfortunately you have to strip boards etc from rear of m/c to get at it
But first check that the pressure rollers on top of the delivery rollers have not been dislodged by the customer
They are a simple spring loaded affair that you will see when you open the clamshel
good luck
bushy
thats not a machine, thats a reef!
why you still trying to fix 20 year old copiers?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.