PDA

View Full Version : I Want to buy Firmware & ISWTrns to use for Konica C6500


Custom Search


truongson
12-09-2012, 10:57 AM
Hi all,
I want to buy Latest Konica C6500 Firmware & ISWTrns to install my machines. Thanks

JSC
12-09-2012, 11:07 AM
Hi all,
I want to buy Latest Konica C6500 Firmware & ISWTrns to install my machines. Thanks

Paul will get back to you as soon as he has finished sleeping......

truongson
12-09-2012, 11:14 AM
Paul will get back to you as soon as he has finished sleeping......

Thank you, and if send a PM please send to : truongson@gmail.com.

JustManuals
12-09-2012, 01:46 PM
Hi all,
I want to buy Latest Konica C6500 Firmware & ISWTrns to install my machines. Thanks


I have it, EMAIL me at Paul@justmanuals.com

truongson
12-09-2012, 03:15 PM
I have it, EMAIL me at Paul@justmanuals.com


I have just sent a email to Paul@justmanuals.com . Please check it. Thanks

JustManuals
12-29-2012, 12:44 AM
I have just sent a email to Paul@justmanuals.com . Please check it. Thanks

I got the email just today. I asked him if he sent it from Mars. Sheesh! 2 weeks for an email to arrive?

rbachlani
07-19-2016, 12:14 PM
I got the email just today. I asked him if he sent it from Mars. Sheesh! 2 weeks for an email to arrive?



Need ISWTrns for writing bizhub 950 firmware my email id is raheel.bachlani@gmail.com. Can you please help me paul asap

Regards,
RB

blackcat4866
07-19-2016, 12:27 PM
Alas, you are a couple years too late. Paul passed ... it must be two years ago. =^..^=

rbachlani
07-19-2016, 01:15 PM
Alas, you are a couple years too late. Paul passed ... it must be two years ago. =^..^=

ok as per blackcat suggested. Here is what I have done till now:
1) I have two bizhub 950. Bought it from a dealer here. One is working fine but the other one freezes whenever i give a job from laptop or recall a data from the saved storage. Or save a file in hdd.
2) I pulled out hdd1 and changed it with the other machine and the machine was working fine without any hanging problem. This was just to be sure that the fault was from hdd1 (which is now confirmed).
3) I changed hdd1 with hdd2 and which is in the controller so that i can format the drive because there is no option to format hdd1 directly.
4) Then I got D002.
5) After that I had some sata hard drives from my computer which i tried to again format first by putting it in the controller and formatted it.
6) After putting them all again one by one at hdd1 place. I am still getting D002.

Any suggestions what should i do
Regards,
RB

cxtqd
08-08-2016, 07:21 AM
I want to buy Konica C6500 Firmware & ISWTrns to install. Pls quote and payment method, Thanks
Email: printkid2011@yahoo.com

Custom Search