View Full Version : Miscellaneous fs 3140mfp
kyogenius
12-24-2012, 02:56 AM
What's the envelope mode all about,this machine is working but displays this message on screen'
Envelope mode '
blackcat4866
12-24-2012, 11:53 AM
Perhaps you've got an "envelope" media type set on one of the trays? Probably MPT. If there is an "envelope" setting for the fuser, I doubt that the machine could sense the position of the pressure levers. =^..^=
dikyo
12-24-2012, 05:22 PM
Hi,
Push the two green buttons on the fuser, and the "envelope setting" is set to off.
groet,
Dikyo
JustManuals
12-24-2012, 05:45 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Special this week, just $11.00
kyogenius
12-24-2012, 07:11 PM
Thanks guys will give it a try after holidays,merry Xmas n prosperous new 2013
Bri Ski
12-27-2012, 02:37 AM
Its definately the buttons on top the fuser
zoraldinho
12-29-2012, 09:51 AM
Its definately the buttons on top the fuser
I agree.
kyogenius
01-04-2013, 10:49 AM
I agree.
thanks guys its those green levers on the fuser unit, so simple
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.