PDA

View Full Version : Error Code Error C6708


Custom Search


Crowy79
01-02-2013, 04:43 PM
Hi

This is my first post so hope this is ok.

We have recently taken on service of a Konica 6500 and this machine has coded up with C6708, So far i have updated the firmware, I have changed the Exposure lamp, the Exposure starter board, the CCD and also the harness from the CCD to the PCB. There is a bulletin to check ICP's on various boards, so I have done this and they are all ok.

What happens is, on power up the Lamp lights up moves left then right then the machine codes up straight away.

Any help with this would be very much appreciated

Thanks

Mick01
01-04-2013, 03:49 AM
Hi,
It seems you have checked the most common solutions to this code. The likely culprits are the Image Processing Board (most likely) or the Interface Board.

Carefully inspect the ribbon cable connection from the CCD to the Image Processing Board. In most cases it is a loose connection or damaged connectors.

Hope this helps.

MAD0RAM
01-04-2013, 10:52 AM
Look straight down at the mirrors and see if you can see the CCD. You could have a mirror out of place.

Crowy79
01-04-2013, 11:37 AM
Thanks for your help Guys, I have ordered a new PCB and will check the mirrors on return. I will let you know how I get on.

Cheers

Crowy79
01-04-2013, 11:50 AM
Sorry meant IPB

Custom Search