C2558 error in Bizhub 164

[amethyst30]

I have a problem on the error C2558 in Bizhub 164. I have changed the tcr sensor and OPC drum, still, after warming C2558 immediately appeared. I have closed and open the front door but C2558 kept on appearing. Do I have to change the developer powder?

Thank you for any idea you may share with me.

Sincerely,

Amethyst30

[humpty dumpty]

You have to replace the dev and then run dev setup otherwise you will keep getting this code.

cheers

[juve]

I have a problem on the error C2558 in Bizhub 164. I have changed the tcr sensor and OPC drum, still, after warming C2558 immediately appeared. I have closed and open the front door but C2558 kept on appearing. Do I have to change the developer powder?

Thank you for any idea you may share with me.

Sincerely,

Amethyst30
i will first replace developer and do atdc adjustment (tcr)

[amethyst30]

You have to replace the dev and then run dev setup otherwise you will keep getting this code.

cheers

Thank you for the reply. I followed your method and it worked well. As of now I am still using my bizhub 164.

Amethyst30