PDA

View Full Version : c451 imaging unit rebuild?


Custom Search


mrfuser
01-18-2013, 05:09 PM
Anyone know if there is a rebuild kit for the C451 imaging units? Seems like such a waste to just replace the entire assembly.


Thanks all


Kelly

Eddie
01-18-2013, 07:11 PM
you can refuse them and get one more life out of them. i have a program and burner for it

Max
01-21-2013, 04:27 PM
Just chip them or there is a f/w and some software switches you have to change to stop the message from appearing but for that ull need access to konika web site for more info.

mrfuser
01-21-2013, 04:37 PM
Hello all,

I know all the above and that is not what I am asking if you read carefully. Is there not anyone that sells a drum and blade kit for this?

kelly

jonbonse
07-29-2016, 10:39 AM
Hello all,

I know all the above and that is not what I am asking if you read carefully. Is there not anyone that sells a drum and blade kit for this?

kelly

Did you manage to find somewhere?

mrfuser
07-29-2016, 05:28 PM
Yes long ago. Why do you ask?

Brischaffer
07-29-2016, 05:34 PM
There is and we've done it. Don't waste your time or money!!!! Its a pain in the ass to do and they don't last that long anyway. Your out the next month replacing the IU anyway. Why waste the time and travel!

allan
07-29-2016, 10:51 PM
How well does these rebuild kits last.
Are they any good?

copyman
07-29-2016, 11:13 PM
I haven't rebuilt the C451 yet but have done the C253 and they work fine. The kit is drum, blade & fuse. They also sell all the color developers seperately.

copyman
07-30-2016, 02:57 AM
copylite products sells everything to rebuild the C451 , C253, C220, etc image units

Synaux
07-30-2016, 03:50 AM
I have been thinking about doing a rebuild on a k iu. I think what is most important is the developer and I guess the blade.
The drums seem to always out-live the units. I bet you can get 3x life on the drums.

Custom Search