Synaux
01-18-2013, 11:12 PM
Working on a c650 + IC-409 again.
I flashed the firmware (C650_A00H0Y0-F000-GS6-R6) and changed software switch 54 to 00001100 if I remember correctly to suppress the IU life message (and low toner message--on the owner's request).
I changed the setting in service mode (and stop 0 clear) to IU Life Stop setting to No Stop.
So the messages disappeared for the IU replacements making the machine useable. Or so I thought--it appears that the Fiery is halting printing, but inconsistently.
On the screen, I get the dandy little "Alert" icon. When I press it, the very informative Fiery interface tells me that the Yellow IU over life limit. Yes, I know darling, just print...restarting the 409 sometimes works, but most of the time the printer shows as Offline in XP.
Any ideas?
*edit*
It is probably worth bearing in mind that I can ping the Fiery. Also, for the past hour or so, it will only print one job then I have to restart the Fiery...
I flashed the firmware (C650_A00H0Y0-F000-GS6-R6) and changed software switch 54 to 00001100 if I remember correctly to suppress the IU life message (and low toner message--on the owner's request).
I changed the setting in service mode (and stop 0 clear) to IU Life Stop setting to No Stop.
So the messages disappeared for the IU replacements making the machine useable. Or so I thought--it appears that the Fiery is halting printing, but inconsistently.
On the screen, I get the dandy little "Alert" icon. When I press it, the very informative Fiery interface tells me that the Yellow IU over life limit. Yes, I know darling, just print...restarting the 409 sometimes works, but most of the time the printer shows as Offline in XP.
Any ideas?
*edit*
It is probably worth bearing in mind that I can ping the Fiery. Also, for the past hour or so, it will only print one job then I have to restart the Fiery...