Minolta 2010 cs pro Jamming @ Drum Unit

[sagar4]

I have a minolta 2010 CS Pro jamming on and off at the drum. Seems like static when it sticks to the drum. I can pull the paper right off. It seems like it clings to the drum. I was thinking about replacing the conrona assembly since the one on the copier looks worn out. Every thing else looks fine. Any suggestions. Thanks

[Darren King]

Possibly the registration clutch is failing. Clean or replace.
Darren

[mo0651]

IS THE SEPARATION WIRE IN THE UNIT BROKEN? Is the paper folded and jammed or just laying in there?

[sagar4]

IS THE SEPARATION WIRE IN THE UNIT BROKEN? Is the paper folded and jammed or just laying in there?

Wire is not broken. And yes it folds slightly and sticks to drum. Not all the time maybe evey 20th sheet or so. That's why I was thinking the corona assembly not functioning correctly and static builds static up.

[mo0651]

Nope sounds like clutch.

[sagar4]

Nope sounds like clutch.

Okay clutch it is. By any chance would you know the part number. Thanks

[Hansoon]

No need for new. Soak it and wash it out with brake cleaner than blow dry with compressed air. Works like new for sure.

Hans

[sagar4]

Okay thanks every one for the information.

[johnnymeg]

If that does not work try the solenoid for the drum pick off. It has been awhile but I remember that causing a similar issue.