PDA

View Full Version : Error Code Konica 7020 F-28-3 error


Custom Search


jay-oh
01-22-2013, 02:09 AM
I've got a Konica 7020 and when attempting to make a copy it has a f-28-3 error.
I've found a couple of posts about how to fix this issue, but I do not find them particularly clear.
If anyone is able to give me some advice about a potential solution it would be much appreciated.

My machine has done about 40 000 copies.

Thank you.

LIOEEK
01-22-2013, 05:36 AM
Check the HV casing for corrosion, check the insulators.. its on the left side door if im not mistaken.

juve
01-23-2013, 09:22 AM
first trasfer unit ,check or replace
2.hv block at side door +insulaters
3.arcing in the belly of conveyance(were the t.s. unit is placed)
4.charge unit

Custom Search