View Full Version : Printer Controller mainboard Konica C5600 can use for C5500
printduthu
01-30-2013, 04:44 AM
Hi,
Printer Controller mainboard Konica C6500 can use for C5500 ?
Thank you,
CopyJunkie
01-30-2013, 06:37 PM
Well the part number for the PRCB is the same in both parts manuals so I would say yes, they are interchangable.
printduthu
01-31-2013, 02:39 AM
Well the part number for the PRCB is the same in both parts manuals so I would say yes, they are interchangable.
Thank you very much !
tervel12
01-31-2013, 04:26 PM
The firmware for the C5500 is different so you will need to flash the board with the correct firmware.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.