View Full Version : mp c 2500
mrgene
02-02-2013, 03:42 PM
I have a couple of these machine that will not print anything in black . Am I missing something simple ?
tried good working drums transferbelts even changed out the high voltage board.
Any help. please
hello
for this pb remove the laser shutter plate (no exist on mp c2800!!)
mrgene
02-02-2013, 04:28 PM
where the heck is that?
myxer1234
02-02-2013, 05:37 PM
Are you saying it will not copy in B&W that you get a blank page but it will copy in color?
ruben
02-02-2013, 06:04 PM
where the heck is that?
Directly above the LSU, marked here as number 5. Leave numbers 8 and 10 intact, when you do remove it.
19233
JustManuals
02-02-2013, 06:07 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
mrgene
02-02-2013, 06:23 PM
Are you saying it will not copy in B&W that you get a blank page but it will copy in color?
yes anything with blcack does not print
kannuki2
02-03-2013, 01:58 AM
I would double check the image transfer charge roller there are 4 of them. The black probably popped out of position
myxer1234
02-03-2013, 03:20 PM
Change SP2-914-001 and 002 to 45 to open and close laser shutter for a longer time.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.