PDA

View Full Version : pagepro 4650 - 'paper jam transfer'


Custom Search


juve
02-07-2013, 05:21 PM
I have a problem on a pagepro4650.it is marking 'paper jam transfer' from tray 2,
found paper jammed just after pick up of tray 2.when i tested from tray 1 no paper jam trasfer was indicated.
so I replaced tray 2 with another one.but same problem happened.any idea?
copy count of printer 22647

mo0651
02-07-2013, 05:55 PM
same as for the pp4650

JustManuals
02-07-2013, 06:09 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

juve
02-10-2013, 03:27 PM
same as for the pp4650
sorry I didnt understand your post

mo0651
02-11-2013, 02:34 PM
Sorry. Same as for the 40p you posted.

juve
02-11-2013, 09:15 PM
Sorry. Same as for the 40p you posted.
ok,it seems something from the clutch.thanks

mo0651
02-11-2013, 10:39 PM
We have quite a few of these in the field, I have changed 2 paper feed clutches. The ones i changed had over 200k clicks on them. Look for something simple first.

juve
02-13-2013, 09:56 PM
We have quite a few of these in the field, I have changed 2 paper feed clutches. The ones i changed had over 200k clicks on them. Look for something simple first.
the problem was a flipped over guide at the tray 2 feed,probably caused by a wrong removal of paperjam.and for the 40p the problem was a sensor out of position(unclipped from oneside)in the tray 1 unit.a manufacture problem because the 40p was new and this sensor can't be reached by a removal of a paper jam.

Custom Search