new bizhub 40p giving 'paper jam transfer'

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • juve
    Technician

    50+ Posts
    • Dec 2012
    • 86

    #1

    new bizhub 40p giving 'paper jam transfer'

    IMG00010.jpga new printer istalled just a week ago is giving me 'paper jam transfer' .when opened no paper jam is found.I removed t.s roller a checked for a loose contact,but it seems ok.any help please?
    Last edited by juve; 02-07-2013, 06:34 PM. Reason: forgot to put photo
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: new bizhub 40p giving 'paper jam transfer'

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • mo0651
      Service Manager

      1,000+ Posts
      • Apr 2009
      • 1054

      #3
      Re: new bizhub 40p giving 'paper jam transfer'

      check the feed and sep rollers. Make sure they are seated and clipped on shaft. Especially the sep roller on tray.

      Comment

      • juve
        Technician

        50+ Posts
        • Dec 2012
        • 86

        #4
        Re: new bizhub 40p giving 'paper jam transfer'

        Originally posted by manuals4you
        This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


        Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


        Paul@justmanuals.com
        i allready have them thanks

        Comment

        • juve
          Technician

          50+ Posts
          • Dec 2012
          • 86

          #5
          Re: new bizhub 40p giving 'paper jam transfer'

          Originally posted by mo0651
          check the feed and sep rollers. Make sure they are seated and clipped on shaft. Especially the sep roller on tray.
          I will ,i will disassamble the feed roller assy and check.thanks.i will leave a feedback if this is the problem

          Comment

          Working...