PDA

View Full Version : C 252 Black Panel


Custom Search


Rudi
01-24-2008, 02:31 PM
Hi All
I Have A Huge Problem With A C252 When I Switch The Mach On It Will Display The Hour Glass For A Couple Of Seconds And You Can Actually Hear The Machine Start Up But Before It Can Switch Over To Its Opperational Display The Display Goes Black The Only Light That Stays On Is The Power Light And The Machine Can Also Not Print Nor Fax Or Anything Else For That Matter .

Please Help

Haroldbfix
02-04-2008, 02:43 AM
I had this problem before. I was the MFP board. located on the left side of the machine next to the power supply. It could also be the NVRAM.

random
02-04-2008, 05:06 AM
remove the fax board and accessories and try again.

laserman06
02-05-2008, 04:00 AM
NVRAM. Had exact same thing happen. Reset it or replace it. Keep in mind that you have to resetup the machine either way.

bowser
04-10-2008, 05:57 AM
yes it is the nvram,pwb-m (next to the power supply)and last but not least the pwb-C in the scanner also.
the pwbm will have the center ic blown out of it.

Custom Search