View Full Version : Miscellaneous C352 Dog Earring
I have a C352 and replaced the fuser unit and it started to dog ear one side then the other and now both. I put the old one back in and it stopped, I can not see anything that would cause this.
Darren King
02-18-2013, 09:30 PM
Did you replace it with a brand new fuser? Over time the upper scraper assembly can warp from the heat and lift the scrapers off the roller, and cause paper to be dog eared. The individual scrapers are adjustable, but, this is just a temporary fix. It is best to use a new fuser.
Hope this helps.
Darren
JustManuals
02-19-2013, 12:00 AM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.